Xi'an Wonder Energy Chemical Co.,Ltd is one of the leading China netralizer corrosion inhibitor for refinery manufacturers and suppliers, and also a professional company with one of the famous brand. Welcome to buy high quality and wholesale atmospheric and vacuum corrosion inhibitor products from our factory.corrosion inhibitorIntroduction Film-forming components of WD05-101 film-forming corrosion inhibitor can form tight protective film rapidly on metal surfaces, preventing direct contact between corrosive mediums and metal surfaces, and can form film on phase change parts of corrosive mediums, as well as equipment and pipelines in previous areas, playing a role of corrosion inhibition and achieving better preservative effect.Product features (1) It can form tight protective film on metal surfaces, preventing direct contact between corrosive mediums and metal surfaces, and reducing hydrogen blistering. (2) It contains no various ions that may cause hydrogen embrittlement of the materials, thus it can prevent hydrogen embrittlement of the materials effectively and avoid hydrogen embrittlement hazards and hydrogen attack of hydrogenation units. (3) When it is injected into system with recommended dose, the corrosion rate is less than 0.02 mm/a (carbon steel), and content of iron ions adjoining water at tower top is not more than 3 mg/l. In addition, it will have no harmful effect on quality of oil products and units downstream.IndexItems ScopeAppearance Brown homogeneous liquidFreezing point≤-20℃Density（20℃）,g/cm3 0.900Flash point ℃ (Closed cup) ≥ 65℃Application method☆ Chemical agent dosage: it is recommended that added WD05-101 film-forming corrosion inhibitor content is 20～30 µg/g of handling capacity of the units. The users shall adjust added content according to properties, water content and sulfur content, etc. of the crude oil processed.☆ Agent adding port: Overhead condensing system of atmospheric-vacuum. ☆ Service conditions: Applicable temperature is 100℃~220℃, and the diesel shall be injected continuously by metering pump after dilution.☆ Safety features: WD05-101 film-forming corrosion inhibitor is oil-soluble, non-hazardous, non-flammable and non-explosive liquid.Effect test method Regular test shall be conducted to iron ions in waste water discharged by the units while in use to observe effects of the inhibitor. Content of iron ions in waste water shall be not more than 3mg/l.Package, storage and transportation ☆ Packed with 208Lbarrel the Net weight is 185±0.5kg/barrel.☆ Avoid of fire and Stored in cool and dry environment.☆ Avoid of the staining of the skin.. Water is forbidden to use to put out the fire. Notes☆Wearing safety gloves and goggles, wash with plenty of water if incidentally touched with skin or eyes.